LMP INCAN GTL1.75 MIDG FLAN 2.5V
VARIABLE TRANSFORMER 264V 0.8A
LAMP INCAND T1.75 MIDG FLAN 2.5V
LAMP INCAND T1-3/4 MIDGET FLANGE
THOMAS & BETTS 252 CONDUIT FITTING, SQUEEZE CONN, IRON, 7.94MM
3M 2529 通用光纤接头, FIBRLOK系列
BAHCO 2520 电缆剪钳, HD 570MM
VARIABLE TRANSFORMER 280V 10A
GC ELECTRONICS 2520 Tool Alignment Screwdriver Duplex 7 In
SILICONE COVER STRANDED-CORE WIR
SMALL FIBER SPLICE ORGANIZR TRAY
FIBER SPLICE ORGANIZER TRAY
SPLICE ORGANIZER TRAY
STIG RAVN 2520 JOINT, 2ARMS
The 2520 is a liquid-tight strain relief Cord Connector made of straight die cast zinc body. It is suitable for use with the flexible cord and cable fittings. It is suitable for use in hazardous locations where general purpose equipment is specifically permitted by NEC 501-4(b). Fittings shall be equipped with a beveled moisture resistant/oil resistant synthetic rubber bushing. The neoprene bushing makes liquid-tight installation and applies pressure against cable the full length of bushing.
The Model 2520 Pulsed Laser Diode Test System is an integrated, synchronized system for testing laser diodes early in the manufacturing process, when proper temperature control cannot be easily achieved. The Model 2520 provides all sourcing and measurement capabilities needed for pulsed and continuous LIV (light-current-voltage) testing of laser diodes in one compact, half-rack instrument. The tight synchronization of source and measure capabilities ensures high measurement accuracy, even when testing with pulse widths as short as 500ns.
The 2522 is a 1/2-inch straight Cord Connector made of die-cast zinc. A liquid-tight connector to connect flexible cord or power cable to a box or enclosure and provides adequate strain relief. It is suitable for use in hazardous locations where general purpose equipment is specifically permitted by NEC.
THOMAS & BETTS 2525 Cable Gland, 0.625 ", 0.75 ", 1/2, Steel
THOMAS & BETTS 2523 Cable Gland, 0.45 ", 0.56 ", 1/2, Steel