# PHOENIX CONTACT E/UK 连接器配件, End Clamp, NS 32 or NS 35/7.5 Din Rail, E/UK系列
Connector/cable; Female M12; Male M12; TPE; 0.30 m; Drag chain compatible
The RC18/EUK is a RC18 Variable Speed Rotary Tool Kit with handy aluminium carrying and storage case.
# LIGHTCRAFT LC8076EUK 16W Long Reach Round Magnifier Lamp with Sun Protector Cap, 5" Lens & 3 Dioptre (1.75x Mag.)
# LIGHTCRAFT LC8074EUK 22W Round Magnifier Lamp with Sun Protector Cap, 5" Lens & 3 Dioptre (1.75x Magnification)
# LIGHTCRAFT LC8079EUK 28W Long Reach Rectangular Magnifier Lamp with Sun Cap, 190x160mm Lens & 3 Dioptre (1.75x Mag.)
Comparator Single R-R O/P 5.5V Automotive 5-Pin SOT-23
* 11µA Quiescent Supply Current * 2.5V to 5.5V Single-Supply Operation * Common-Mode Input Voltage Range Extends 250mV Beyond the Rails * 300ns Propagation Delay * Push-Pull Output Stage Sinks and Sources 8mA Current (MAX985/MAX989/MAX993) * Open-Drain Output Voltage Extends Beyond VCC (MAX986/MAX990/MAX994) * Unique Output Stage Reduces Output Switching Current, Minimizing Overall Power Consumption * 80µA Supply Current at 1MHz Switching Frequency * No Phase Reversal for Overdriven Inputs * Available in Space-Saving Packages: * UCSP (MAX985) * SOT23 (MAX985/MAX986/MAX989/MAX990) * µMAX® (MAX989/MAX990)
The MAX917–MAX920 nanopower comparators in space-saving SOT23 packages feature Beyond-the-Rails™ inputs and are guaranteed to operate down to +1.8V. The MAX917/MAX918 feature an on-board 1.245V ±1.5% reference and draw an ultra-low supply current of only 750nA, while the MAX919/MAX920 (without reference) require just 380nA of supply current. These features make the MAX917–MAX920 family of comparators ideal for all 2-cell battery applications, including monitoring/management. The unique design of the output stage limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic conditions. The MAX917/MAX919 have a push-pull output stage that sinks and sources current. Large internal output drivers allow rail-to-rail output swing with loads up to 8mA. The MAX918/MAX920 have an open-drain output stage that makes them suitable for mixed-voltage system design.
IC COMPARATOR BTR SOT23-5
SOT23, 1.8V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators
IC REG SWTCHD CAP INV 25MA 5TSOP
IC REG SWTCHD CAP INV 25MA 5TSOP
The MAX961–MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input common-mode range extends 100mV Beyond-the-Rails™, and the outputs can sink or source 4mA to within 0.52V of GND and VCC. Propagation delay is 4.5ns (5mV overdrive), while supply current is 5mA per comparator. The MAX961/MAX963/MAX964 and MAX997 have a shutdown mode in which they consume only 270µA supply current per comparator. The MAX961/MAX963 provide complementary outputs and a latch-enable feature. Latch enable allows the user to hold a valid comparator output. The MAX999 is available in a tiny SOT23-5 package. The single MAX961/MAX997 and dual MAX962 are available in space-saving 8-pin µMAX® packages.
Charge Pump INV -1.5V to -5.5V 25mA 5-Pin SOT-23
# MAXIM INTEGRATED PRODUCTS MAX999EUK+ 模拟比较器, 轨至轨, 高速, 1, 4.5 ns, 2.7V 至 5.5V, SOT-23, 5 引脚